Chevrolet 2008 Impala Specifications download pdf (Page 133)

100

101

Flash-to-Pass

With the turn signal lever in the low-beam position,

pull the lever toward you momentarily to switch

to high-beam, to signal that you are going to pass.

If the headlamps are on, they will return to low-beam

when the lever is released.

Windshield Wipers

Clear ice and snow from the wiper blades before using

them. If they are frozen to the windshield, gently

loosen or thaw them. Damaged wiper blades may not

clear the windshield well, making it harder to see

and drive safely. If the blades do become damaged,

install new blades or blade inserts. For more information,

see Windshield Wiper Blade Replacement on page 5-52.

Heavy snow or ice can overload the wiper motor.

A circuit breaker will stop the motor until it cools down.

Clear away snow or ice to prevent an overload.

Turn the band with the wiper symbol to control the

windshield wipers.

8(Mist): Turn the band to mist for a single wiping

cycle. Hold it there until the wipers start. Then let go.

The wipers stop after one wipe. Hold the band on mist

longer, for more wipe cycles.

9(Off): To stop the wipers, move the band to off.

6 (Delay): Turn the band to adjust the delay time.

The delay between wiping cycles becomes shorter as

the band is moved to the top of the lever. This can

be very useful in light rain or snow.

6 (Low Speed): Turn the band away from you to

the ﬁrst solid band past the delay settings, for steady

wiping at low speed.

? (High Speed): Turn the band further, to the

second solid band past the delay settings, for

high-speed wiping.

3-9

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 399 400

Comments to this Manuals

No comments

Chevrolet 2008 Impala Specifications Page 133

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2008 Impala