Chevrolet Silverado 2004 Specifications download pdf (Page 149)

100

101

Temperature Display

The temperature can be displayed by pressing the

TEMP button. Pressing the TEMP button once brieﬂy,

will toggle the temperature reading on and off. To

alternate the temperature reading between Fahrenheit

and Celsius, press and hold the TEMP button for

approximately four seconds until the display blinks °F

and °C. Press and release the TEMP button to

toggle between the Fahrenheit and Celsius readings.

After approximately four seconds of inactivity, the display

will stop blinking and display the last selection made.

If an abnormal reading is displayed, for an extended

period of time, please consult your dealer. Under certain

circumstances, a delay in updating the temperature is

normal.

Automatic Dimming Mirror Operation

The time period you need to press and hold the TEMP

button to turn the automatic dimming feature on or

off is approximately eight seconds. The indicator light to

the left of the TEMP button will still turn on or off to

show you when the automatic dimming feature is

activated. Once the mirror is turned off, it will remain off

until it is turned back on, or until the vehicle is

restarted.

Compass Operation

Press the COMP button once brieﬂy to turn the compass

on or off.

When the ignition and the compass feature are on, the

compass will show two character boxes for

approximately two seconds. After two seconds, the

mirror will display the compass heading.

Compass Calibration

The compass may need calibration if one of the

following occurs:

• If CAL is displayed while driving in the vehicle.

• After approximately ﬁve seconds, the display does

not show a compass heading (N for North, for

example), there may be a strong magnetic ﬁeld

interfering with the compass. Such interference may

be caused by a magnetic antenna mount, magnetic

note pad holder or a similar magnetic item.

• The compass does not display the correct heading

and the compass zone variance is set correctly.

In order to calibrate, CAL must be displayed in the

mirror compass windows. If CAL is not displayed, push

in the COMP button for approximately eight seconds

or until CAL is displayed.

The compass can be calibrated by driving the vehicle in

circles at ﬁve mph (8 km/h) or less until the display

reads a direction.

2-57

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 573 574

Comments to this Manuals

No comments

Chevrolet Silverado 2004 Specifications Page 149

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet Silverado 2004