Sidemarker Lamps
with
Sealed Beam and
Composite Headlamps
2.
3.
Pull the bulb ,straight
out
of
the socket.
.
Remove the screws and
pull out the parkinghrn
signal lamp assembly.
4.
Put a new bulb into the socket and push it in until it
is tight.
Reach through the opening and turn the sidemarker
bulb socket to the left and remove
it.
5.
Put the socket back into the sidemarker assembly
and turn it
to
the right
to
tighten it.
6.
Replace the parkingkurn signal lamp assembly and
tighten the screws.
6-40
Comments to this Manuals