Chevrolet 2005 Equinox Specifications download pdf (Page 229)

Hitches

It is important to have the correct hitch equipment.

Crosswinds, large trucks going by and rough roads are

a few reasons why you will need the right hitch. Here

are some rules to follow:

• If you will be pulling a trailer that, when loaded, will

weigh more than 2,000 lbs (900 kg), be sure to use

a properly mounted, weight-carrying hitch and

sway control of the proper size. This equipment is

very important for proper vehicle loading and

good handling when you’re driving.

• Will you have to make any holes in the body of

your vehicle when you install a trailer hitch?

If you do, remember to seal the holes when you

remove the hitch. If you do not seal them, deadly

carbon monoxide (CO) from your exhaust can

get into your vehicle. See Engine Exhaust

on page 2-25. Dirt and water can, too.

Safety Chains

You should always attach chains between your vehicle

and your trailer. Cross the safety chains under the

tongue of the trailer to help prevent the tongue from

contacting the road if it becomes separated from

the hitch. Instructions about safety chains may be

provided by the hitch manufacturer or by the trailer

manufacturer. Follow the manufacturer’s

recommendation for attaching safety chains and do not

attach them to the bumper. Always leave just enough

slack so you can turn with your rig. Never allow

safety chains to drag on the ground.

Trailer Brakes

If your trailer weighs more than 1,000 lbs (450 kg)

loaded, then it needs its own brakes – and they must be

adequate. Be sure to read and follow the instructions

for the trailer brakes so you will be able to install, adjust

and maintain them properly.

Because your vehicle may have anti-lock brakes, do not

try to tap into your vehicle’s brake system. If you do,

both brake systems will not work well, or at all.

4-39

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 363 364

No comments

Chevrolet 2005 Equinox Specifications Page 229