Chevrolet 2007 Colorado Specifications download pdf (Page 402)

For regular and

extended cab vehicles,

the jack and wheel

blocks are located

under the cover at the

center of the vehicle

behind the front seats.

To access the tools:

1. Move the seats

forward to access

the cover.

2. Turn the wing nut on the cover

counterclockwise to remove it.

For crew cab models, reach under the rear

seat to access the jack and wheel blocks.

To reinstall the jack and wheel block assembly

in the mounting bracket, insert the tabs into

the jack base by pushing the blocks up into

the assembly. The outer hole in the jack base

aligns with the tab on the bracket. When

reinstalling, make sure the jack is secure, but

do not overtighten the jack in the bracket.

3. Remove the wheel blocks and the wheel

block retainer by turning the wing nut

counterclockwise.

4. Put the wheel blocks at the front and rear

of the tire farthest away from the one being

changed. That would be the tire on the

other side, at the opposite end of the vehicle.

5. Locate the wing nut used to retain the storage

bag and tools which is under the front

passenger’s seat. Remove it by turning the

wing nut counterclockwise.

You will use the jack handle extensions and the

wheel wrench to remove the underbody-mounted

spare tire.

Regular/Extended Cab

Extended/Regular Cab

402

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 495 496

Comments to this Manuals

No comments