Chevrolet 2010 Camaro User Manual download pdf (Page 254)

If no coolant is visible in the coolant

overﬂow bottle, add coolant as

follows:

3.6 L V6 Engine Fill Procedure

1. Locate the radiator cap.

See Engine Compartment

Overview on page 9-6.

2. Remove engine cover to access

the radiator cap. See Engine

Cover on page 9-9.

3. Cover the radiator cap with a

thick cloth and turn it slowly

counterclockwise and remove.

4. If there is no coolant visible or

the level is low, slowly ﬁll the

system through the radiator cap

opening with a 50/50 mixture

of DEX-COOL

®

and clean

drinkable water.

Wait 30 seconds for coolant to

settle and continue ﬁlling if

the level drops.

Do not spill coolant on the

accessory drive belts.

If a spill occurs, rinse the belt

with fresh water.

5. Start the engine.

6. With the engine idling, continue

to add coolant through the

radiator cap opening until full.

Wait 30 seconds for the coolant

to settle and top off, if the level

drops.

7. Once the system is full, put the

radiator cap back on by turning

clockwise.

8. With the engine still running,

raise the engine to 2500 RPM

for 30–40 seconds.

9. Turn the engine OFF.

10. Repeat steps 2–7 then turn the

engine off.

11. Allow engine to cool for

45 minutes. Top off coolant

through the radiator cap

opening and re-install the

radiator cap.

12. Re-install the engine cover.

See Engine Cover on

page 9-9.

13. Check the coolant level in the

coolant recovery bottle and ﬁll

it until the level is at the top

symbol on the dipstick.

9-22 Vehicle Care

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 371 372

Comments to this Manuals

No comments