Chevrolet Silverado 2008 Specifications download pdf (Page 517)

G. Hoist Shaft

H. Wheel Wrench

I. Jack Handle

J. Spare Tire Lock

(If Equipped)

1. Put the tire on the ground at the rear of the vehicle

with the valve stem pointed down, and to the rear.

2. Separate the tire/wheel retainer (D) from the guide

pin. Pull the pin through the center of the wheel.

Tilt the retainer down and through the center

wheel opening.

Make sure the retainer is fully seated across

the underside of the wheel.

3. Attach the wheel wrench (H) and extensions (I)

together, as shown.

4. Insert the hoist end (F)

through the hole (G) in

the rear bumper and

onto the hoist shaft.

Do not use the

chiseled end of the

wheel wrench.

Chevrolet Silverado 2008 Specifications Page 517