Chevrolet 2006 impala Specifications download pdf (Page 58)

There is no top tether anchor at the right front seating

position. Do not secure a child restraint in this position if

a national or local law requires that the top tether be

anchored or if the instructions that come with the child

restraint say that the top tether must be anchored.

See Lower Anchors and Tethers for Children (LATCH)

on page 1-43 if your child restraint has a top tether.

You will be using the lap-shoulder belt to secure the

child restraint in this position. Be sure to follow the

instructions that came with the child restraint. Secure

the child in the child restraint when and as the

instructions say.

1. Your vehicle has a right front passenger’s frontal

airbag. See Passenger Sensing System on

page 1-63. General Motors recommends that

rear-facing child restraints be secured in a rear seat,

even if the airbag is off. If your child restraint is

forward-facing, move the seat as far back as it will

go before securing the child restraint in this seat.

See Manual Passenger Seat on page 1-2 or

Six-Way Power Seats on page 1-2.

When the passenger sensing system has turned off

the right front passenger’s frontal airbag, the off

indicator in the passenger airbag status indicator

should light and stay lit when you turn the ignition to

RUN or START. See Passenger Airbag Status

Indicator on page 3-28.

2. Put the child restraint on the seat.

3. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or

around the restraint. The child restraint instructions

will show you how.

4. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the

safety belt quickly if you ever had to.

1-52

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 389 390

No comments

Chevrolet 2006 impala Specifications Page 58