Front
Turn
Signal -Lamps
Taillamps
1.
Remove the two screws at the inside edge
of
the
1.
Open the
rear
door.
parking/turn signal lamp assembly.
2.
Remove the lamp
assembly.
2.
Remove the two screws
from behind the door.
3
3.
Squeeze the tab
on
the
side
of
the lamp socket
while turning the socket
I
counterclockwise.
.4.
Pull the socket out
of
the lamp assembly.
5.
Pull the bulb from the socket.
6.
Gently push the new bulb into the socket.
7.
Put-the socket back into the lamp assembly and turn
it clockwise until it locks.
8.
Put the parking/turn signal lamp assembly back into
the vehicle and tighten the screws.
6-40
Comments to this Manuals