Chevrolet 2002 tracker Owner's Manual download pdf (Page 102)

2-37

Turn and Lane-Change Signals

The turn signal has an upward (for right) and a downward

(for left) position. These positions allow you to signal a

turn or a lane change.

To signal a turn, move the lever all the way up or down.

When the turn is finished, the lever will return automatically.

An arrow on the instrument

panel cluster will flash in

the direction of the turn

or lane change.

To signal a lane change, just raise or lower the lever

until the arrow starts to flash. Hold it there until you

complete your lane change. The lever will return by

itself when you release it.

As you signal a turn or a lane change, if the arrows don’t

flash but just stay on, a signal bulb may be burned out

and other drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an

accident. If the arrows don’t go on at all when you

signal a turn, check the fuse (see “Fuses and Circuit

Breakers” in the Index) and for burned-out bulbs.

Headlamp High/Low-Beam Changer

First, you must have the headlamps on. For high beams,

push the turn signal lever toward the instrument panel.

When the high beams are

on, a light on the instrument

panel cluster also will be on.

It will go off when you

switch to low beam.

To switch back to low beams, pull the lever toward you.

Flash-to-Pass Feature

With the lever in the low-beam position, pull the

lever toward you to momentarily switch to high beam

(to signal that you are going to pass). When you

release the lever, the headlamps will return to

low

-beam operation.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 389 390

No comments

Chevrolet 2002 tracker Owner's Manual Page 102