Chevrolet 2006 Colorado Specifications download pdf (Page 64)

100

101

5. To tighten the belt, push down on the child restraint,

pull the shoulder portion of the belt to tighten the

lap portion of the belt and feed the shoulder

belt back into the retractor. If you are using a

forward-facing child restraint, you may ﬁnd it

helpful to use your knee to push down on the

child restraint as you tighten the belt.

6. If your child restraint has a top tether, attach and

tighten the top tether to the top tether anchor.

Refer to the instructions that came with the child

restraint and to Lower Anchors and Tethers

for Children (LATCH) on page 1-46.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, if the top tether is

attached, disconnect it. Unbuckle the vehicle’s safety

belt and let it go back all the way. The safety belt

will move freely again and be ready to work for an adult

or larger child passenger. For outboard seating

positions, when the safety belt is not in use, slide the

latch plate up the safety belt webbing. The latch plate

should rest on the stitching on the safety belt, near

the upper anchor on the side wall.

Securing a Child Restraint in the

Center Front Seat Position

{CAUTION:

A child in a child restraint in the center front

seat can be badly injured or killed by the right

front passenger’s airbag if it inﬂates. Never

secure a child restraint in the center front seat.

It is always better to secure a child restraint in

the rear seat.

Do not use child restraints in this position. The restraints

will not work properly.

1-58

1 ... 63 64 65 ... 430

Comments to this Manuals

No comments

Chevrolet 2006 Colorado Specifications Page 64

Comments to this Manuals

Related products and manuals for Cars Chevrolet 2006 Colorado