Chevrolet Captiva C140 Specifications download pdf (Page 208)

* Cold Temperature Operation: In an

area of extreme cold, where the

temperature falls below −29°C (−20°F),

an SAE 0W-30 oil may be used. An oil

of this viscosity grade will provide

easier cold starting for the engine at

extremely low temperatures. When

selecting an oil of the appropriate

viscosity grade, always select an oil of

the correct specification. See “Specifi-

cation” earlier in this section for more

information.

Engine Oil Additives/Engine Oil

Flushes

Do not add anything to the oil. The use

of engine oil additives could cause

engine damage not covered by the

vehicle warranty. Engine oil system

flushes are not recommended and could

cause engine damage not covered by

the vehicle warranty.

9-10 Vehicle Care

SAE 5W-30 is the best viscosity grade

for the vehicle.* Do not use other

viscosity grade oils such as SAE 10W-

30, 10W-40, or 20W-50.

Selecting the right engine oil depends

on both the proper oil specification

and viscosity grade.

Specification

This vehicle was filled at the factory

with dexos approved engine oil.

Ensure that the correct specification of

oil is used. See Recommended Fluids

and Lubricants on page 10-5.

Caution

Use only engine oil that is approved to

the dexos specification or equivalent

engine oil as defined in Recom-

mended Fluids and Lubricants.

Failure to use the recommended

engine oil or equivalent can result in

engine damage not covered by the

vehicle warranty.

Selecting the Right Engine Oil Viscosity Grade

1 ... 207 208 209 ... 338

Comments to this Manuals

จตุพร 12 Jul 2024 | 07:10:28

good