Chevrolet Tahoe, Suburban 2007 Specifications download pdf (Page 262)

Relearn Remote Key

This display allows you to match Remote Keyless

Entry (RKE) transmitters to your vehicle. To

match an RKE transmitter to your vehicle, do the

following:

1. Press the vehicle information button until

PRESS

V TO RELEARN REMOTE KEY

displays.

2. Press the set/reset button until REMOTE KEY

LEARNING ACTIVE is displayed.

3. Press and hold the lock and unlock buttons

on the ﬁrst transmitter at the same time for

approximately 15 seconds.

A chime will sound indicating that the

transmitter is matched.

4. To match additional transmitters at this time,

repeat Step 3.

Each vehicle can have a maximum of eight

transmitters matched to it.

5. To exit the programming mode, you must

cycle the key to LOCK.

Blank Display

This display shows no information.

DIC Operation and Displays

(Without DIC Buttons)

If your vehicle does not have DIC buttons, the

information below explains the operation of

this system.

The DIC has different displays which can be

accessed by pressing the trip odometer reset stem

located on the instrument panel cluster. Pressing

the trip odometer reset stem will also turn off,

or acknowledge, DIC messages.

The DIC displays trip and vehicle system

information, and warning messages if a system

problem is detected.

If your vehicle does not have DIC buttons, you

can use the trip odometer reset stem to view the

following displays: odometer, engine hours,

trip odometer, oil life, Tire Pressure Monitor (TPM)

system programming for vehicles with a TPM

system, Remote Keyless Entry (RKE) transmitter

programming, and display language.

If your vehicle has DIC buttons, you can use the

trip odometer reset stem to view the following

displays: odometer, engine hours, trip odometer,

and display language.

262

1 ... 261 262 263 ... 622

Comments to this Manuals

No comments