Chevrolet Trax Service Manual download pdf (Page 32)

30 Keys, doors and windows

Operation

You may operate the power windows

when the ignition switch is ON by

using the power window switches on

each door panel.

To open the window, press down on

the switch.

To close the window, lift up on the

switch.

Release the switch when the window

reaches the desired position.

Auto up/down

To fully open the window

automatically, press the switch fully

down. To fully close the window

automatically, pull the switch fully up.

In automatic operation, the window

will fully open or close even if you

let go of the switch.

To stop the window at the desired

position while the window is in

operation, pull up or press down and

release the switch to the opposite

direction of the movement.

Anti-pinch function

In case there is obstacle detection

while the driver's window is closed

automatically, the window will be

opened automatically for safety.

Initializing the power windows

If the windows cannot be closed

automatically (e.g. after

disconnecting the vehicle battery),

activate the window electronics as

follows:

1. Close doors.

2. Switch on ignition.

3. Close the window completely and

keep the switch pulled for

additional 2 seconds.

4. Repeat for each window.

{Warining

Body parts outside vehicle can be

struck by passing objects. Keep all

parts of body inside vehicle.

Children can operate and become

entrapped in power windows.

Do not leave your keys or

unattended children in your car.

Serious injury or death can occur

from misuse of power windows.

{Warining

Anti-pinch function may not

operate after several times

operation.

Do not operate the window switch

with no purpose.

1 ... 31 32 33 ... 326

Comments to this Manuals

No comments