Chevrolet VENTURE 2005 Specifications Page 361

  • Download
  • Add to my manuals
  • Print
  • Page
    / 470
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 360
3. Unscrew the cap and wipe the dipstick with a
clean rag.
4. Replace the cap and completely tighten it.
5. Remove the cap again and look at the fluid level on
the dipstick.
When the engine compartment is hot, the level should
be at the H (hot) mark. When it is cold, the level
should be at the C (cold) mark. If the fluid is at the
ADD mark, you should add fluid.
What Power Steering Fluid to Use
To determine what kind of fluid to use, see
Recommended Fluids and Lubricants on page 6-12.
Always use the proper fluid. Failure to use the proper
fluid can cause leaks and damage hoses and seals.
Windshield Washer Fluid
What Washer Fluid to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will
be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Adding Washer Fluid
Open the cap with the
washer symbol on it. Add
washer fluid until the tank
is full. See Engine
Compartment Overview on
page 5-12 for reservoir
location.
Notice:
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-35
Page view 360
1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 469 470

Comments to this Manuals

No comments