Chevrolet 1994 Astro Owner's Manual Page 261

  • Download
  • Add to my manuals
  • Print
  • Page
    / 340
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 260
Door weatherstrips and rubber hood bumpers should be wiped clean with
a
wet cloth and lightly coated
with
a rubber lubricant.
Never use too much of any lubricant and be sure
to wipe up
any
extra
lubricant when you are finished.
Some parts
that
need lubricating are hard to get at. Window regulators and
controls are inside the doors. You can get to these by removing
the
trim
panels.
Refer
to the Maintenance Schedule to determine how often to lubricate
these items and what type of lubricant to use.
Lock Cylinders
To
be sure your locks operate properly, they must be lubricated.
Refer to the Maintenance Schedule to determine how often to lubricate them
and what type of lubricant to use.
You should not use penetrating oils because they could wash out
the
factory
installed lubricant and cause the lock to bind. De-icers which contain
alcohol could also
wash
away the lubricant,
so
be sure to lubricate the lock
after using a de-icer of this type.
Exhaust System
To
help prevent damage to your exhaust system, do not continue
to
drive
your vehicle if you notice:
Engine misfiring
Loss
of
performance
Other unusual operating conditions
Have your engine and exhaust system serviced regularly.
Three-
Way
Catalytic Converter
Your vehicle’s three-way catalytic converter
is
designed to reduce the
pollutants in your vehicle’s exhaust. Use only unleaded fuel in your vehicle.
If you use leaded fuel, you could damage your three-way catalytic converter
and other engine components.
Engine Control Module System
This system has an oxygen
(02)
sensor that helps keep your engine’s
air-fuel mixture at a proper level. Use only unleaded fuel in your vehicle.
If
you use leaded fuel, you could damage your oxygen
(02)
sensor and affect
your vehicle’s emissions.
6-43
Page view 260
1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 339 340

Comments to this Manuals

No comments