Chevrolet 2006 Colorado Specifications download pdf (Page 93)

100

101

Removing the Tailgate

Follow these steps if you want to remove the tailgate:

1. With the tailgate fully open, lift up slightly on

the entire tailgate assembly.

Remove the retaining

cables from both sides of

the tailgate by pulling the

clips away from the bolt

heads while pushing the

cable bracket forward.

When the larger part of the

hole on the bracket is over

the bolt, slide the bracket

off of the bolt.

2. With the tailgate partially down, lift up on the

passenger’s side and pull the tailgate toward

you, then move the tailgate to the right to release

the driver’s side. You can then remove the

entire tailgate assembly.

Reverse the procedure to reinstall the tailgate.

Make sure it is secure.

To partially lower the tailgate do the following:

1. With the tailgate fully open, lift up slightly on the

entire tailgate assembly.

2. Remove the retaining

cable from the

passenger side of the

tailgate by pulling the

clip away from the bolt

head while pushing the

cable bracket forward.

When the larger part of the hole on the bracket is

over the bolt, slide the bracket off of the bolt.

3. Slide the lower end ﬁtting onto the top bolt.

The tailgate will now stay in the partially

opened position.

4. Repeat steps 2 and 3 for the driver side.

If you would like to close the tailgate, the bracket cannot

be in the partially opened position and must be anchored

on the bottom bolt, using the top position on the bracket.

Tailgate Partially Down

2-11

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 439 440

Comments to this Manuals

No comments

Chevrolet 2006 Colorado Specifications Page 93

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2006 Colorado