Chevrolet Silverado 2008 Specifications download pdf (Page 56)

100

101

If the position you are using

has an adjustable headrest

or head restraint and you

are using a single tether,

raise the headrest or head

restraint and route the

tether under the headrest

or head restraint and in

between the headrest or

head restraint posts.

2. See Securing a Child Restraint in the Right Front

Seat Position (With Airbag Off Switch) on page 1-57

or Securing a Child Restraint in the Right Front

Seat Position (With Passenger Sensing System)

on page 1-62 or Securing a Child Restraint in

the Right Front Seat Position (Heavy Duty Crew

Cab Only) on page 1-66 for instructions on installing

the child restraint using the safety belts.

3. Push and pull the child restraint in different

directions to be sure it is secure.

Crew and Extended Cab Models

1. Attach and tighten the lower attachments to the

lower anchors. If the child restraint does not have

lower attachments or the desired seating position

does not have lower anchors, secure the child

restraint with the top tether and the safety belts.

Refer to your child restraint manufacturer

instructions and the instructions in this manual.

1.1. Find the lower anchors for the desired

seating position.

1.2. Put the child restraint on the seat.

1.3. Attach and tighten the lower attachments on

the child restraint to the lower anchors.

2. If the child restraint manufacturer recommends that

the top tether be attached, attach and tighten the top

tether to the top tether anchor (loop), if your vehicle

has one. Refer to the child restraint instructions and

the following steps:

1-52

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 595 596

Comments to this Manuals

No comments

Chevrolet Silverado 2008 Specifications Page 56

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet Silverado 2008