Removing the Spare Tire and
Tools
The jacking equipment you’ll need is stored by your
vehicle’s rear doors, along the passenger’s side wall.
1.
Remove the jack cover by pulling it away from
the side wall and down to release the tabs
securing the top of the cover.
2.
Remove the wheel blocks by turning the top nut
counterclockwise. Remove the nut and washer,
then pull the wheel blocks
off
the bolt.
3.
Push down
on
the bolt and remove the hooked end
from the slot. Slide the jack toward the front of the
vehicle and lift it from the mounting. Remove
the extension and the ratchet from the pouch.
5-72
Comments to this Manuals