Chevrolet 2004 Epica Specifications download pdf (Page 49)

Securing a Child Restraint Designed

for the LATCH System

1. Find the LATCH anchorages for the seating

position you want to use, where the bottom of the

seatback meets the back of the seat cushion.

See Lower Anchorages and Top Tethers for

Children (LATCH System) on page 1-40.

2. Put the child restraint on the seat.

3. Attach and tighten the LATCH attachments on

the child restraint to the LATCH anchorages in

the vehicle. The child restraint instructions will

show you how.

4. If the child restraint is forward-facing, attach and

tighten the top tether to the top tether anchorage.

The child restraint instructions will show you

how. Also see Top Strap on page 1-37.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the

top tether from the top tether anchorage and then

disconnect the LATCH attachments from the LATCH

anchorages.

Securing a Child Restraint in a

Rear Outside Seat Position

If your child restraint is equipped with the LATCH

system, see Lower Anchorages and Top Tethers for

Children (LATCH System) on page 1-40. See Top Strap

on page 1-37 if the child restraint has one.

If your child restraint does not have the LATCH system,

you’ll be using the lap-shoulder belt to secure the child

restraint in this position. Be sure to follow the instructions

that came with the child restraint. Secure the child in the

child restraint when and as the instructions say.

1. Put the restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or

around the restraint. The child restraint instructions

will show you how.

1-43

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 337 338

No comments

Chevrolet 2004 Epica Specifications Page 49