Chevrolet 2012 Traverse User Manual download pdf (Page 114)

Black plate (58,1)

Chevrolet Traverse Owner Manual - 2012

3-58 Seats and Restraints

5. Pull the shoulder belt all the way

out of the retractor to set the

lock. When the retractor lock is

set, the belt can be tightened but

not pulled out of the retractor.

6. To tighten the belt, push down

on the child restraint, pull the

shoulder portion of the belt to

tighten the lap portion of the belt,

and feed the shoulder belt back

into the retractor. When installing

a forward-facing child restraint,

it may be helpful to use your

knee to push down on the child

restraint as you tighten the belt.

Try to pull the belt out of the

retractor to make sure the

retractor is locked. If the

retractor is not locked repeat

Steps 5 and 6.

7. Before placing a child in the

child restraint, make sure it is

securely held in place. To check,

grasp the child restraint at the

safety belt path and attempt to

move it side to side and back

and forth. When the child

restraint is properly installed,

there should be no more than

2.5 cm (1 in) of movement.

If the airbags are off, the off

indicator in the passenger airbag

status indicator will come on and

stay on when the vehicle is started.

If a child restraint has been installed

and the on indicator is lit, see “If

the On Indicator Is Lit for a Child

Restraint” under Passenger Sensing

System on page 3‑31 for more

information.

To remove the child restraint,

unbuckle the vehicle safety belt and

let it return to the stowed position.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 449 450

Comments to this Manuals

No comments