Chevrolet Malibu 2007 Specifications download pdf (Page 192)

Automatic Climate Control System

If your vehicle has this system, you can

automatically control the heating, cooling and

ventilation in your vehicle.

Automatic Operation

AUTO (Automatic): Select AUTO on both the fan

speed control and the air delivery mode control

knobs to activate the automatic system. When

automatic operation is active the system will

control the inside temperature and air delivery.

Use the steps below to place the entire system in

automatic mode:

1. Place the fan knob and the mode knob

to AUTO.

The display will now show the current set

temperature. When auto is selected, the

air conditioning operation and air inlet will be

automatically controlled. The air conditioning

compressor will run when the outside

temperature is over about 40°F (4°C). The air

inlet will normally be set to outside air. If it’s hot

outside, the air inlet may automatically switch

to recirculate inside air to help quickly cool

down your vehicle.

2. Set the temperature.

To ﬁnd your comfort setting, start with an initial

temperature setting and allow about 20 minutes

for the system to regulate. Press the up or

down arrow temperature buttons to adjust the

temperature setting as necessary. If you

choose the temperature setting of 60°F (15°C)

the system will remain at the maximum cooling

setting. If you choose the temperature setting

of 90°F (32°C) the system will remain at the

192

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 509 510

Comments to this Manuals

No comments