Chevrolet 2008 Uplander Specifications Page 350

  • Download
  • Add to my manuals
  • Print
  • Page
    / 476
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 349
{CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Do not spill coolant on a hot engine.
3. Fill the radiator with the proper DEX-COOL
®
coolant mixture, up to the base of the filler
neck. See Engine Coolant on page 5-22 for more
information about the proper coolant mixture.
4. Rinse or wipe any spilled coolant from the engine
and the compartment.
5. Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
6. By this time, the coolant level inside the radiator
filler neck may be lower. If the level is lower, add
more of the proper DEX-COOL
®
coolant mixture
through the filler neck until the level reaches
the base of the filler neck.
7. Then replace the pressure cap. At any time during
this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure
the pressure cap is closed properly.
8. Then fill the coolant recovery tank to the
full cold mark.
9. Put the cap back on the coolant recovery tank.
Filling the Coolant Recovery Tank
5-30
Page view 349
1 2 ... 345 346 347 348 349 350 351 352 353 354 355 ... 475 476

Comments to this Manuals

No comments