Chevrolet 2008 Uplander Specifications Page 363

  • Download
  • Add to my manuals
  • Print
  • Page
    / 476
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 362
To replace one of these bulbs:
1. Open the hood. See Hood Release on page 5-11
for more information.
2. Remove the headlamp retainer pin (A) by turning it
towards the headlamp assembly and pulling it
straight out.
3. Remove the screw (B) from the top of the headlamp
assembly.
4. Pull the assembly away from the vehicle.
5. Disconnect the socket wiring harness connector
from the headlamp assembly.
6. Turn the bulb socket counterclockwise to remove
from the assembly.
7. To replace a headlamp bulb, disconnect the bulb
socket wiring harness and connect to the new
bulb socket.
To replace a sidemarker bulb, pull the old bulb out
and push a new bulb in.
8. Reinstall the bulb socket by inserting into the bulb
assembly and turning it clockwise to secure.
9. Reverse the steps to reinstall the headlamp
assembly.
5-43
Page view 362
1 2 ... 358 359 360 361 362 363 364 365 366 367 368 ... 475 476

Comments to this Manuals

No comments