Chevrolet 2000 Venture Owner's Manual download pdf (Page 23)

100

101

1-11

Replacing the Split Bench Sections

Make sure the seatback is in the upright position and the

safety belts are on the correct section of the seat.

Don’t put the sections of the bench seat in so they face

rearward because they won’t latch that way. If you want

more storage room behind the seat, adjust each section

by sliding it forward.

The split benches have seat position labels, located on

the back of each seat, showing where the seat must go.

Follow that diagram.

The left (40) section of the 40/60 split bench uses the

A and B sets of floor cups.

The right (60) section of the 40/60 split bench uses

the C and D sets of floor cups.

The left section of the 50/50 split bench uses the

G and H sets of floor cups.

The right section of the 50/50 split bench uses the

I and J sets of floor cups.

See “Seat Controls” in the beginning of this section for

more details. The seat must be placed in the proper

location for the legs to attach correctly.

Make sure the seat is in the full rear position before

beginning this procedure.

1. Squeeze the angled bar toward the solid crossbar

while placing the front hooks of the bench seat onto

the front two floor pins.

1 ... 22 23 24 ... 429

Comments to this Manuals

No comments

Chevrolet 2000 Venture Owner's Manual Page 23

Comments to this Manuals

Related products and manuals for Cars Chevrolet 2000 Venture