Chevrolet 1995 S10 Pickup Owner's Manual Page 329

  • Download
  • Add to my manuals
  • Print
  • Page
    / 380
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 328
I
Maintenance Schedule
I
I
57,000
Miles
(95
000
km)
0
Change engine oil and filter (or every
3
months, whichever occurs
0
Lubricate the front suspension, ball joints (ball joints should not be
first).
An
Emission Control Service.
lubricated unless their temperature
is
10°F (-12°C) or higher. When
the weather is cold, let them warm up before lubricating them or they
could be damaged.), steering linkage and transfer case shift linkage,
parking brake cable guides, propshaft splines, universal joints, brake
pedal springs, and clutch pedal springs at every oil change (or every
6
months, whichever occurs first).
constant velocity joints and axle seals for leaking.**
0
Check readfront axle fluid level and add fluid as needed. Check
DATE
SERVICED
BY
ACTUAL
MILEAGE
60,000
Miles
(I00
000
km)
0
0
0
0
0
Change engine oil and filter (or every
3
months, whichever occurs
first).
An
Emission Control Service.
Lubricate the front suspension, ball joints (ball joints should not be
lubricated unless their temperature is 10
"F
(-1
2" C) or higher. When
the weather is cold, let them warm up before lubricating them or they
could be damaged.), steering linkage and transfer case shift linkage,
parking brake cable guides, propshaft splines, universal joints, brake
pedal,springs, and clutch pedal springs at
every
oil change (or every
6
months, whichever occurs first).
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.**
Inspect engine accessory drive belt (or
every
24 months, whichever
occurs first).
An Emission Control Service.
Drain,
flush
and refill cooling system (or every 24 months, whichever
occurs first). Inspect hoses. Clean radiator, condenser, pressure cap and
neck. Pressure test the cooling system and pressure cap.
An Emission
Control Service.
(Continued)
7-17
Page view 328
1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 379 380

Comments to this Manuals

No comments