Chevrolet 1996 Cavalier Owner's Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 372
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
For a single wiper cycle, press the stalk down until
the wipers start, then let go. The wipers will stop after
one cycle. For more cycles, hold the wiper stalk
down longer.
For fixed delay wiper cycles, move the wiper switch to
DELAY
for wiper cycles with a fixed time delay
between them.
For steady wiper cycles, move the wiper stalk up to
either
1
or
2,
depending on the wiper speed you want.
To
turn wipers off, move the stalk down to OFF.
Remember that damaged wiper blades may prevent you
from seeing well enough to drive safely.
To
avoid
damage, be sure to clear ice and snow from the wiper
blades before using them.
If
they’re frozen to the
windshield, carefully loosen
or
thaw them. If your
blades do become damaged, get new blades or blade
inserts.
Heavy snow or ice can overload your wipers.
A
circuit
breaker will stop them
until
the motor cools. Clear away
snow or ice to prevent an overload.
Controlled
Cycle
Wipers (Option)
If
your vehicle has variable controlled-cycle windshield
wipers,
you
can
set
the
wiper
speed
for
a
long
or
short
delay between wipes. This can be very useful in light
rain or snow.
Move the stalk to
DELAY,
then rotate the band to
choose the delay you want. Rotate the band
up
for
shorter delay times between wiper cycles. Rotate the
band down for longer delay times between wiper cycles.
2-33
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 371 372

Comments to this Manuals

No comments