Tire Inspection
and
Rotation
1
Tires should be inspected every
6,000
to
8,000
miles
(10
000
to
13
000
km)
for any signs
of
unusual wear.
If
unusual wear is present, rotate your tires as soon as
possible and check wheel alignment. Also check for
damaged tires or wheels. See “When It’s Time for New
Tires” and “Wheel Replacement” later in this section for
more information.
The purpose of regular rotation is to achieve more
uniform wear for all tires on the vehicle. The first
rotation is the most important. See “Scheduled
Maintenance Services” in the Index for scheduled
rotation intervals.
When rotating your tires, always use the Correct rotation
pattern shown here.
Don’t include the compact spare tire
in
your tire
rotation.
After the tires have been rotated, adjust the front and
rear inflation pressures as shown on the Tire-Loading
Information label. Make certain that all wheel nuts
are properly tightened. See “Wheel Nut Torque” in
the Index.
A
CAUTION:
Rust or dirt on
a
wheel, or on the parts to which
it is fastened, can make wheel nuts become loose
after
a
time. The wheel could come
off
and cause
an accident. When you change
a
wheel, remove
any rust or dirt from places where the wheel
attaches to the vehicle. In an emergency, you can
use
a
cloth or
a
paper towel to
do
this; but be
sure to use
a
scraper or wire brush later,
if
you
need to, to get all the rust or dirt
off.
(See
“Changing
a
Flat Tire” in the Index.)
,
6-38
Comments to this Manuals