I
Lift the hood, release the
hood prop from its retainer
and put the hood prop into
the slot
in
the hood.
Use the prop rod sleeve
when handling the prop rod.
'
Before closing the hood, be sure all the filler caps are on
properly. Then lift the hood to relieve pressure on the
Then go to the front of the vehicle and lift the secondary hood prop. Remove fie hood prop from the slot in the
hood release handle. hood and return the prop to its retainer. Lower the hood
To make
sure
that the secondary hood release handle
works properly, lubricate the hood latch at least once
a year.
8
to
10
inches (20 to*25kn) above the vehicle and
release
so
that
it
will latch fully.
Check
to make sure the
hood is closed and repeat
if
necessary.
6-7
Comments to this Manuals