Chevrolet 2004 Tahoe Specifications Page 387

  • Download
  • Add to my manuals
  • Print
  • Page
    / 548
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 386
To remove the fuel cap, turn it slowly to the left
(counterclockwise). It will require more effort to turn
the fuel cap on the last turn as you loosen it.
{CAUTION:
If you spill fuel and then something ignites it,
you could be badly burned. Fuel can spray out
on you if you open the fuel cap too quickly.
This spray can happen if your tank is nearly full,
and is more likely in hot weather. Open the fuel
cap slowly and wait for any “hiss” noise to stop.
Then unscrew the cap all the way.
Be careful not to spill fuel. Don’t top off or overfill your
tank and wait a few seconds after you’ve finished
pumping before you remove the nozzle. Clean any
spilled fuel from painted surfaces as soon as possible.
See Cleaning the Outside of Your Vehicle on page 5-105.
When you put the fuel cap back on, turn it to the right
(clockwise) until you hear a clicking sound. It will require
more effort to turn the fuel cap on the last turn as
you tighten it. Make sure you fully install the cap.
The diagnostic system can determine if the fuel cap has
been left off or improperly installed. this would allow
fuel to evaporate into the atmosphere. See Malfunction
Indicator Lamp on page 3-50.
{CAUTION:
If a fire starts while you are refueling, do not
remove the nozzle. Shut off the flow of fuel
by shutting off the pump or by notifying the
station attendant. Leave the area immediately.
Notice: If you need a new fuel cap, be sure to get the
right type. Your dealer can get one for you. If you get
the wrong type, it may not fit properly. This may
cause your malfunction indicator lamp to light and
may damage your fuel tank and emissions system.
See Malfunction Indicator Lamp on page 3-50.
5-9
Page view 386
1 2 ... 382 383 384 385 386 387 388 389 390 391 392 ... 547 548

Comments to this Manuals

No comments