Then, follow these steps:
1.
The manual transaxle
dipstick is located
below the brake
master cylinder,
near
the rear of the
transaxle case. Flip the
handle up and then
pull out the dipstick
and clean
it
with a rag
or paper towel.
2. Push it back in all the way and remove it.
3.
Check both sides
of
the dipstick and read the lower
level. The fluid level must be between the
ADD
and
FULL
marks. (Note: Fluid may appear at the bottom
of the dipstick even when the fluid level is several
pints low.)
4.
If the fluid level is where it should be, push the
dipstick back
in
all the way and flip the handle
down. If the fluid level is low, add more fluid
as
described in the next steps.
6-23
Comments to this Manuals