Chevrolet 2011 Suburban User Manual download pdf (Page 137)

Black plate (75,1)

Chevrolet Tahoe/Suburban Owner Manual - 2011

Seats and Restraints 3-75

6. To tighten the belt, push down

on the child restraint, pull the

shoulder portion of the belt to

tighten the lap portion of the belt,

and feed the shoulder belt back

into the retractor. When installing

a forward-facing child restraint, it

may be helpful to use your knee

to push down on the child

restraint as you tighten the belt.

Try to pull the belt out of the

retractor to make sure the

retractor is locked. If the

retractor is not locked, repeat

Steps 5 and 6.

7. Before placing a child in the

child restraint, make sure it is

securely held in place. To check,

grasp the child restraint at the

safety belt path and attempt to

move it side‐to‐side and back‐

and‐forth. When the child

restraint is properly installed,

there should be no more than

2.5 cm (1 in) of movement.

If the vehicle is equipped with the

passenger sensing system, and

when the passenger sensing system

has turned off the right front

passenger frontal airbag, the off

indicator in the passenger airbag

status indicator should light and stay

lit when you start the vehicle. See

Passenger Airbag Status Indicator

on page 5‑19.

If a child restraint has been installed

and the on indicator is lit, see “If the

On Indicator is Lit for a Child

Restraint” under Passenger Sensing

System on page 3‑45 for more

information.

To remove the child restraint,

unbuckle the vehicle safety belt and

let it return to the stowed position.

1 ... 136 137 138 ... 522

Comments to this Manuals

No comments