EMERGENCIES 5–9
USING THE TIRE SEALANT ANDUSING THE TIRE SEALANT AND
USING THE TIRE SEALANT ANDUSING THE TIRE SEALANT AND
USING THE TIRE SEALANT AND
COMPRESSOR KIT WITHOUT SEALANTCOMPRESSOR KIT WITHOUT SEALANT
COMPRESSOR KIT WITHOUT SEALANTCOMPRESSOR KIT WITHOUT SEALANT
COMPRESSOR KIT WITHOUT SEALANT
TT
TT
T
O INFLO INFL
O INFLO INFL
O INFL
AA
AA
A
TE A TYRE (NOTE A TYRE (NO
TE A TYRE (NOTE A TYRE (NO
TE A TYRE (NO
T PUNCTUREDT PUNCTURED
T PUNCTUREDT PUNCTURED
T PUNCTURED
))
))
)
To use the air compressor to inflate a tyre
with air only and not sealant:
If a tyre goes flat, avoid further tyre and wheel
damage by driving slowly to a level place. Turn
on the hazard warning flashers.
1. Remove the tyre sealant and compressor
kit from its storage location.
2. Unwrap the air only hose (6) and the
power plug (8).
3. Place the kit on the ground.
Make sure the tyre valve stem is
positioned close to the ground so the hose
will reach it.
4. Remove the tyre valve stem cap by turning
it counterclockwise.
5. Attach the air only hose (6) onto the tyre
valve stem and turn it clockwise until tight.
6. Plug the power plug (8) into the accessory
power outlet in the vehicle. Unplug all
items from other accessory power outlets.
If the vehicle has an accessory power out-
let, do not use the cigarette lighter.
If the vehicle only has a cigarette lighter,
use the cigarette lighter.
Do not pinch the power plug cord in the
door or window.
7. Start the vehicle. The vehicle must be
running while using the air compressor.
8. Turn the selector switch (3) clockwise to
the Air Only position.
9. Press the on/off (4) button to turn the
compressor on.
The compressor will inflate the tyre with
air only.
Comments to this Manuals