Chevrolet 2004 Tahoe Specifications download pdf (Page 164)

100

101

Turn and Lane Change Signals

The turn signal has two upward (for right) and two

downward (for left) positions. These positions allow you

to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down.

When the turn is ﬁnished, the lever will return

automatically.

To signal a lane change, just raise or lower the lever

until the arrow starts to ﬂash. Hold it there until you

complete your lane change. The lever will return by itself

when you release it.

An arrow on the instrument

panel cluster will ﬂash in

the direction of the

turn or lane change.

As you signal a turn or a lane change, if the arrows

ﬂash more quickly than normal, a signal bulb may

be burned out and other drivers won’t see your

turn signal.

If a bulb is burned out, replace it to help avoid an

accident. If the arrows don’t go on at all when you signal

a turn, check for burned-out bulbs and a blown fuse.

See Fuses and Circuit Breakers on page 5-111.

Turn Signal On Chime

If your turn signal is left on for more than 3/4 of a mile

(1.2 km), a chime will sound at each ﬂash of the

turn signal and the message TURN SIGNAL ON will

also appear in the DIC. To turn the chime and message

off, move the turn signal lever to the off position.

Headlamp High/Low-Beam Changer

(Headlamp High/Low Beam Changer):

To change the headlamps from low to high beam,

push the lever toward the instrument panel. To return

to low-beam headlamps, pull the multifunction lever

toward you. Then release it.

When the high beams are

on, this indicator light on

the instrument panel

cluster will also be on.

3-8

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 547 548

Comments to this Manuals

No comments

Chevrolet 2004 Tahoe Specifications Page 164

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Tahoe