Chevrolet 2004 Blazer Specifications download pdf (Page 360)

100

101

After the tires have been rotated, adjust the front and

rear inﬂation pressures as shown on the

Certiﬁcation/Tire label or the Tire and Loading

Information label. Make certain that all wheel nuts are

properly tightened. See “Wheel Nut Torque” under

Capacities and Speciﬁcations on page 5-104.

{CAUTION:

Rust or dirt on a wheel, or on the parts to

which it is fastened, can make wheel nuts

become loose after a time. The wheel could

come off and cause an accident. When you

change a wheel, remove any rust or dirt from

places where the wheel attaches to the vehicle.

In an emergency, you can use a cloth or a

paper towel to do this; but be sure to use a

scraper or wire brush later, if you need to, to

get all the rust or dirt off. See “Changing a Flat

Tire” in the Index.

When It Is Time for New Tires

One way to tell when it’s

time for new tires is to

check the treadwear

indicators, which will

appear when your tires

have only 1/16 inch

(1.6 mm) or less of tread

remaining. Some

commercial truck tires may

not have treadwear

indicators.

You need a new tire if any of the following statements

are true:

• You can see the indicators at three or more places

around the tire.

• You can see cord or fabric showing through the

tire’s rubber.

• The tread or sidewall is cracked, cut or snagged

deep enough to show cord or fabric.

• The tire has a bump, bulge or split.

• The tire has a puncture, cut or other damage that

can’t be repaired well because of the size or

location of the damage.

5-62

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 449 450

Comments to this Manuals

No comments

Chevrolet 2004 Blazer Specifications Page 360

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Blazer