Chevrolet 2004 Blazer Specifications download pdf (Page 92)

An indicator light in the knob will show you which

position the transfer case is in. The indicator lights will

come on brieﬂy when you turn on the ignition and

one will stay on. If the lights do not come on, you should

take your vehicle to your dealer for service. An

indicator light will ﬂash while shifting the transfer case. It

will remain illuminated when the shift is complete. If

for some reason the transfer case cannot make a

requested shift, it will return to the last chosen setting.

If the service four-wheel drive light on the instrument

panel cluster stays on, you should take your vehicle to

your dealer for service. See Service Four-Wheel

Drive Warning Light on page 3-46 for further information.

Shifting into 4HI or A4WD

Turn the knob to 4HI or A4WD. This can be done at any

speed unless you are shifting out of 4LO. The indicator

light will ﬂash while shifting. It will remain illuminated

when the shift is complete.

Shifting into 2HI

Turn the knob to 2HI. This can be done at any speed

unless you are shifting out of 4LO.

Shifting into 4LO

To shift to 4LO, the vehicle’s engine must be running

and the vehicle must be stopped or moving less

than 2 mph (3.2 km/h) with the transmission in

NEUTRAL (N). The preferred method for shifting into

4LO is to have your vehicle moving 1 or 2 mph (1.6 to

3.2 km/h). Turn the knob to 4LO. You must wait for

the 4LO indicator light to stop ﬂashing and remain

illuminated before shifting your transmission into gear.

If you turn the knob to 4LO when your vehicle is in gear

and/or moving, the 4LO indicator light will ﬂash for

30 seconds and not complete the shift unless your

vehicle is moving less than 2 mph (3.2 km/h) and the

transmission is in NEUTRAL (N). After 30 seconds, the

transfer case will return to the setting last chosen.

Shifting Out of 4LO

To shift from 4LO to 4HI, A4WD or 2HI your vehicle

must be stopped or moving less than 2 mph (3.2 km/h)

with the transmission in NEUTRAL (N) and the

engine running. The preferred method for shifting out of

4LO is to have your vehicle moving 1 or 2 mph (1.6

to 3.2 km/h). Turn the knob to 4HI, A4WD or 2HI. You

must wait for the 4HI, A4WD or 2HI indicator light to stop

ﬂashing and remain illuminated before shifting your

transmission into gear.

2-26

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 449 450

Comments to this Manuals

No comments

Chevrolet 2004 Blazer Specifications Page 92

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Blazer