Chevrolet 2004 Blazer Specifications download pdf (Page 93)

100

101

If the knob is turned to 4HI, A4WD or 2HI when your

vehicle is in gear and/or moving, the 4HI, A4WD or 2HI

indicator light will ﬂash for 30 seconds. It will not

complete the shift unless your vehicle is moving less

than 2 mph (3.2 km/h) with the transmission in

NEUTRAL (N).

Shifting into NEUTRAL

Before shifting the transfer case to NEUTRAL, ﬁrst

make sure the vehicle is parked so that it will not roll.

1. Set the parking brake.

2. Start the vehicle.

3. Put the transmission in NEUTRAL (N).

4. Shift the transfer case to 2HI.

5. Turn the transfer case knob all of the way past 4LO

and hold it there for a minimum of 10 seconds. The

neutral indicator light will come on.

6. Shift the transmission to REVERSE (R) for one

second, then shift the transmission to DRIVE (D)

for one second.

7. Place the transmission shift lever in PARK (P).

8. Turn the ignition to LOCK.

9. Release the parking brake prior to towing.

Shifting Out of NEUTRAL

To shift the transfer case out of NEUTRAL, do the

following:

1. Set the parking brake and apply the regular brake

pedal.

2. Start the vehicle with the transmission in PARK (P).

3. Turn the transfer case knob to the desired shift

position (2HI, 4HI or A4WD).

4. Put the transmission in NEUTRAL (N).

5. Release the parking brake.

6. After the transfer case has shifted out of NEUTRAL,

the indicator light will go out. Shift the transmission

lever to the desired position.

A re-engagement sound is normal when shifting out of

NEUTRAL.

2-27

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 449 450

Comments to this Manuals

No comments

Chevrolet 2004 Blazer Specifications Page 93

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Blazer