Chevrolet Silverado 2005 Specifications download pdf (Page 173)

100

101

Flash-to-Pass

This feature lets you use your high-beam headlamps to

signal a driver in front of you that you want to pass.

It works even if your headlamps are in the automatic

position.

To use it, pull the turn signal lever toward you, then

release it.

If your headlamps are in the automatic position or on

low beam, your high-beam headlamps will turn on.

They’ll stay on as long as you hold the lever toward you.

The high-beam indicator on the instrument panel

cluster will come on. Release the lever to return to

normal operation.

Windshield Wipers

You control the windshield wipers by turning the band

with the wiper symbol on it.

8(Mist): For a single wiping cycle, turn the band to

mist. Hold it there until the wipers start. Then let go. The

wipers will stop after one wipe. If you want more

wipes, hold the band on mist longer.

N(Delay): You can set the wiper speed for a long or

short delay between wipes. This can be very useful

in light rain or snow. Turn the band to choose the delay

time. The closer to the top of the lever, the shorter

the delay.

6 (Low Speed): For steady wiping at low speed,

turn the band away from you to the ﬁrst solid band past

the delay settings. For high-speed wiping, turn the

band further, to the second solid band past the delay

settings. To stop the wipers, move the band to off.

1 (High Speed): For high-speed wiping, turn

the band further, to the second solid band past the

delay settings.

9(Off): To stop the wipers, move the band to off.

Be sure to clear ice and snow from the wiper blades

before using them. If they’re frozen to the windshield,

carefully loosen or thaw them. If your blades do become

worn or damaged, get new blades or blade inserts.

3-9

1 ... 172 173 174 ... 582

Comments to this Manuals

No comments

Chevrolet Silverado 2005 Specifications Page 173

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet Silverado 2005