Chevrolet Silverado 2005 Specifications download pdf (Page 450)

100

101

Notice: If the jumper cables are removed in the

wrong order, electrical shorting may occur and

damage the vehicle. The repairs would not be

covered by your warranty. Remove the jumper

cables in the correct order, making sure that the

cables do not touch each other or other metal.

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (−) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (−) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles do

the following:

1. Disconnect the black negative (−) cable from the

vehicle that had the bad battery.

2. Disconnect the black negative (−) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the

other vehicle.

5. Return the positive (+) remote terminal cover,

if equipped, to its original position.

All-Wheel Drive

Lubricant checks in this section also apply to these

vehicles. There are two additional systems that need

lubrication.

Transfer Case

When to Check Lubricant

Refer to the Maintenance Schedule to determine how

often to check the lubricant. See Scheduled

Maintenance on page 6-4.

Jumper Cable Removal

5-58

1 ... 449 450 451 ... 582

Comments to this Manuals

No comments

Chevrolet Silverado 2005 Specifications Page 450

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet Silverado 2005