6.
Start the engine and let
it
run
until
you can feel the upper radiator hose
getting hot. Watch out for the engine
fan(s).
7.
By
this time the coolant level inside
the radiator filler neck may be lower.
If the level is lower, add more
of
the
proper
mix
through the filler neck
until
the level reaches the base
of
the
filler neck.
8.
Then replace the pressure cap.
At
any
time during this procedure if coolant
begins to
flow
out of the filler neck,
reinstall the pressure cap. Be sure the
arrows on the pressure cap line up
like
this.
How
to
Add
Coolant
to
the Radiator
(5.7L
LTl (Code
P)
Engine)
~
NOTICE:
The
LTl
engine (Code
P)
has a
specific radiator fill procedure.
Failure to follow this procedure
could cause your engine to overheat
and be severely damaged.
163
...
Comments to this Manuals