Service
and
Appearance Care
There are four headlights. Each one has
its own vertical and horizontal aim
position indicators. Each indicator has
its own aiming screw.
A.
Vertical Indicator
B.
Horizontal Indicator
C.
Vertical Aiming Screw
D.
Horizontal Aiming Screw
II
!.
I.
I.
Start with the horizontal (left and
right) headlight aim. Don't try to
adjust the vertical (up and down) aim
first.
Check the horizontal aim
for
each
headlight and adjust
it
as necessary.
Turn the horizontal aiming screw
until
the pointer is lined up
with
the
0
(zero).
5.
Now
adjust the vertical aim. Check
the
vertical aim for each headlight and
adjust it as necessary.
6.
Turn the vertical aiming screw
until
the bubble in the level
is
centered
at
0
(zero).
repeat steps
2
and
3.
7.
If
the gage readings are not centered,
Try not to touch threaded parts other than
the vertical and horizontal aiming screws.
If the vehicle body has been damaged
in
an accident or something, the headlight
should be aimed after repairing the body.
.
.
.206
Comments to this Manuals