~
Section
C:
Periodic Maintenance Inspections
Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall).
You should let your
GM
dealer’s service department or other qualified service center do these jobs. Make sure any necessary
repairs are completed at once.
INSPECTION
1
OR
SERVICE
WHAT SHOULD
BE
DONE
Restraint Systems Now and then, make sure all your belts, buckles, latch plates, retractors, anchorages and
reininder systems are working properly. Lodk for any loose parts or damage.
If
you see anything
that might keep a restraint system from doing its job, have it repaired.
Steering and Insped the front and rear suspension and steering system for damaged, loose or missing parts,
Suspension Inspection signs of wear, or lack of lubrication. Inspect the power steering lines and hoses for proper
Exhaust System Inspect the complete exhaust system. Inspect the body near the exhaust system. Look for broken,
Inspection damaged, missing or out-of-position parts as well as open seams, holes, loose connections or
hookup, binding, leaks, cracks, chafing, etc.
other conditions which could cause a heat build-up in the floor pan or could let exhaust fumes
into the vehicle. See “Engine Exhaust” in the Index.
Throttle Linkage Inspect the throttle linkage for interference or binding, and for damaged
or
missing parts.
Inspection Replace parts as needed.
L
249..
.
Comments to this Manuals