Chevrolet 2010 Equinox User Manual download pdf (Page 141)

Lighting 5-3

Turn and Lane-Change

Signals

An arrow on the instrument panel

cluster will flash in the direction of

the turn or lane change.

Move the lever all the way up or

down to signal a turn.

Raise or lower the lever until the

arrow starts to flash to signal a lane

change. Hold it there until the lane

change is complete.

The lever returns to its starting

position when it is released.

If after signaling a turn or a lane

change the arrows flash rapidly or

do not come on, a signal bulb may

be burned out.

Have the bulbs replaced. If the bulb

is not burned out, check the fuse,

see Fuses

on page 9‑37

for more

information.

Fog Lamps

For vehicles with fog lamps, the

control is located on the turn signal/

lane change lever.

Use the fog lamps for better vision

in foggy or misty conditions.

# (Fog Lamps): Turn the fog lamp

band on the lever to

# and release

it, to turn the fog lamps on or off.

The band will return to its original

position.

The parking lamps or low‐beam

headlamps must be on to use the

fog lamps.

The fog lamps will go off whenever

the high-beam headlamps are

turned on. When the high‐beam

headlamps are turned off, the fog

lamps will come on again.

Some localities have laws that

require the headlamps to be on

along with the fog lamps.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 409 410

Comments to this Manuals

No comments