Chevrolet 2010 Equinox User Manual download pdf (Page 355)

Vehicle Care 9-77

10. Connect the other end of the

negative (−) cable away from

the dead battery, but not near

engine parts that move.

11. Start the vehicle with the good

battery and run the engine.

12. Press the unlock symbol on

the remote keyless entry

transmitter to disarm the

security system, if equipped.

13. Try to start the vehicle that had

the dead battery. If it will not

start after a few tries, it needs

service.

Notice: If the jumper cables are

connected or removed in the

wrong order, electrical shorting

may occur and damage the

vehicle. The repairs would not be

covered by the vehicle warranty.

Always connect and remove the

jumper cables in the correct

order, making sure that the

cables do not touch each other or

other metal.

Jumper Cable Removal

A. Heavy, Unpainted Metal Engine

Part or Remote Negative (−)

Terminal

B. Good Battery or Remote

Positive (+) and Remote

Negative (−) Terminals

C. Dead Battery or Remote

Positive (+) Terminal

To disconnect the jumper cables

from both vehicles:

1. Disconnect the black

negative (−) cable from the

vehicle that had the dead

battery.

2. Disconnect the black

negative (−) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+)

cable from the vehicle with the

good battery.

4. Disconnect the red positive (+)

cable from the other vehicle.

5. Return the underhood fuse block

cover to its original position,

if applicable.

1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 409 410

Comments to this Manuals

No comments