Chevrolet 2012 Equinox User Manual Page 252

  • Download
  • Add to my manuals
  • Print
  • Page
    / 428
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 251
Black plate (36,1)
Chevrolet Equinox Owner Manual - 2012
9-36 Driving and Operating
TCS is on whenever the vehicle
is started. To limit wheel spin,
especially in slippery road
conditions, the system should
always be left on. But, TCS can be
turned off if needed.
d flashes to indicate that the
traction control system is active.
If there is a problem detected with
TCS, SERVICE TRACTION
CONTROL and SERVICE
STABILITRAK may be displayed on
the Driver Information Center (DIC)
and
d will be on. See Ride Control
System Messages on page 531.
When this message is displayed
and
d comes on and stays on, the
vehicle is safe to drive but the
system is not operational. Driving
should be adjusted accordingly.
Notice: Do not repeatedly brake
or accelerate heavily when TCS is
off. The vehicle's driveline could
be damaged.
If
d comes on and stays on, reset
the system by:
1. Stopping the vehicle.
2. Turning the engine off and
waiting 15 seconds.
3. Starting the engine.
If
d still comes on and stays on at a
speed above 20 km/h (13 mph), see
your dealer for service.
A chime may also sound when the
light comes on steady.
The
g is located on the console.
The TCS off light comes on and
TRACTION CONTROL OFF is
displayed on the Driver Information
Center (DIC) to indicate that the
traction control system has been
turned off. See Ride Control System
Messages on page 531.
TCS can be turned off by pressing
and releasing
g. When TCS is
turned off,
i comes on and the
system will not limit wheel spin.
Driving should be adjusted
accordingly. Press and release
g
again to turn the system back on.
When TCS is turned off on AWD
vehicles, the system may still make
noise. This is normal and necessary
with AWD hardware.
Page view 251
1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 427 428

Comments to this Manuals

No comments