Chevrolet 2012 Equinox User Manual download pdf (Page 310)

Black plate (30,1)

Chevrolet Equinox Owner Manual - 2012

10-30 Vehicle Care

To remove the wiper blade:

1. Lift the wiper arm away from the

windshield.

A. Wiper Arm

B. Release Lever

C. Blade Assembly

2. Push the release lever (B) to

disengage the hook and push

the wiper arm (A) out of the

blade assembly (C).

3. Push the new blade assembly

securely on the wiper arm until

the release lever clicks into

place.

4. Replace the wiper cover.

Headlamp Aiming

The headlamp aiming system has

been preset at the factory.

If the vehicle is damaged in an

accident, the aim of the headlamps

may be affected and adjustment

may be necessary.

It is recommended that a dealer

adjust the headlamps. To re-aim the

headlamps yourself, use the

following procedure.

The vehicle should be properly

prepared as follows. The vehicle:

.

Should be placed so the

headlamps are 7.6 m (25 ft) from

a light colored wall.

.

Must have all four tires on a

level surface which is level all

the way to the wall.

.

Should be placed so it is

perpendicular to the wall or other

flat surface.

.

Should not have any snow, ice,

or mud on it.

.

Should be fully assembled and

all other work stopped while

headlamp aiming is being

performed.

.

Should be normally loaded with

a full tank of fuel and one person

or 75 kg (160 lbs) sitting on the

driver's seat.

.

Tires should be properly inflated.

Headlamp aiming is done with the

vehicle's low-beam headlamps. The

high-beam headlamps will be

correctly aimed if the low-beam

headlamps are aimed properly.

1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 427 428

Comments to this Manuals

No comments