Chevrolet 2012 Equinox User Manual download pdf (Page 311)

Black plate (31,1)

Chevrolet Equinox Owner Manual - 2012

Vehicle Care 10-31

To adjust the vertical aim, do the

following:

1. Open the hood. See Hood on

page 10‑5 for more information.

2. Locate the aim dot on the lens of

the low‐beam headlamp.

3. Measure the distance from the

ground to the aim dot on the

low‐beam headlamp. Record the

distance.

4. At the wall measure from the

ground upward (A) to the

recorded distance from

Step 3 and mark it.

5. Draw or tape a horizontal line (B)

on the wall the width of the

vehicle at the height of the mark

in Step 4.

Notice: Do not cover a headlamp

to improve beam cut-off when

aiming. Covering a headlamp may

cause excessive heat build-up

which may cause damage to the

headlamp.

6. Turn on the low-beam

headlamps and place a piece of

cardboard or equivalent in front

of the headlamp not being

adjusted. This allows only the

beam of light from the headlamp

being adjusted to be seen on the

flat surface.

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 427 428

Comments to this Manuals

No comments