50 Remove the vent pipe assembly.
(Make sure that the o-ring gaskets did not
stick to the cylinder heads, if so remove
them).
.
51 Using a 15mm tensioner wrench or
breaker bar, remove the stock serpentine
belt from the vehicle. The belt will not be
reused.
.
4.9 Using a 10mm socket wrench remove
the two coolant vent pipe bolts.
5.2 Using a 15mm socket wrench remove
the three bolts holding the factory belt
tensioner to the bracket and remove the
tensioner.
Page 16
2003-2004 Chevy SSR Supercharger Installation Instructions
Comments to this Manuals