1.46 Cut the intercooler hose to length and
secure both ends with a #10 clamp. Attach
the new length of 1/4” heater hose to the
throttle body nipple located just above the
intercooler connection. Secure the 1/4”
hose with the clamp from the original steam
vent pipe hose.
Intercooler
hose
1/4” Heater hose
1.48 Re-connect the steam vent hose from
the radiator coolant tank to its original
location of the barb on the bottom of the
throttle body.
1.47 Route the 1/4” hose around in a
gentle loop to the barb on the steam pipe.
Cut the hose to length and secure this end
with the new clamp supplied.
Intercooler hose
MAF
electrical
connection
1.45 Route the hose up from the lower
opening and across the back side of the air
filter cover to the remaining barb on the
coolant manifold. Note: The rotation of the
MAF and the location of the MAF electrical
connection.
Page 40
2003-2004 Chevy SSR Supercharger Installation Instructions
Comments to this Manuals