Chevrolet 2004 Blazer Specifications download pdf (Page 342)

100

101

8. Now connect the black

negative (−) cable to

the negative (−)

terminal of the good

battery. Use a remote

negative (−) terminal

if the vehicle has one.

Don’t let the other end touch anything until the next

step. The other end of the negative (−) cable

doesn’t go to the dead battery. It goes to a heavy,

unpainted metal engine part or to the remote

negative (−) terminal on the vehicle with the dead

battery. In the L6 engine, the remote negative (−)

terminal is located on the front engine lift bracket

and is marked GND. In the V8 engine, the

remote negative (–) terminal is located on the

accessory drive bracket and is marked GND.

9. Connect the other end of the negative (−) cable to

the remote negative (−)

terminal on the vehicle with the dead battery.

10. Now start the vehicle with the good battery and run

the engine for a while.

11. Try to start the vehicle that had the dead battery. If

it won’t start after a few tries, it probably needs

service.

Notice: If the jumper cables are removed in the

wrong order, electrical shorting may occur and

damage the vehicle. The repairs would not be

covered by your warranty. Remove the jumper

cables in the correct order, making sure that the

cables do not touch each other or other metal.

L6 EngineV8 Engine

5-44

1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 449 450

Comments to this Manuals

No comments

Chevrolet 2004 Blazer Specifications Page 342

Comments to this Manuals

Related products and manuals for Car alarm Chevrolet 2004 Blazer